Author Topic: ARMA 3 Optimization  (Read 3465 times)

Unkn0wn

  • (LMC) Friend
  • *****
  • Posts: 277
ARMA 3 Optimization
« on: March 27, 2013, 02:51:53 pm »
Arma 3 CPU Optimization

1. Go to Steam Library
2. Go to "Arma 3" Right Click then select "Properties"
3. Select "Set Launch Options"
4. Copy and paste the correct launch command line below to what your system is setup for and click "OK".

For AMD CPU users:
AMD Dual Core with 4GB System Ram:
"-noSplash -cpuCount=2 -high"
AMD Quad Core with 4GB Ram:
"-noSplash -cpuCount=4 -high"
AMD Six Core with 4GB Ram:
"-noSplash -cpuCount=6 -high"
AMD Eight Core with 4GB Ram:
"-noSplash -cpuCount=8 -high"
______________________________________________
If your running more than 8GB Ram then apply this to the end of the launch line:
"-maxMem=8192"
This will allow your game to utilize 8GB system Ram instead of 4GB.
______________________________________________
Intel CPU:
For Hyperthreaded CPU's such as a Quad Core you will apply this:
-cpuCount=8
This will enable your Hyperthreads on your CPU so your CPU will act as an eight core when running Arma 3.
If you are running a Hyperthreaded Six Core then:
-cpuCount=12
If you are running a Hyperthreaded Eight Core or Eight Core Xeon then apply this:
-cpuCount=16
If you are running just a non Hyperthreaded CPU such as a Quad Core then select "4" instead of "8" same for a Dual Core you will select "2" instead of "4".
All AMD CPU's are NOT Hyperthreaded so Hyperthreaded options is highly not recommended as this can cause system failure or damage.
I will not be responible for system failure and damage if you choose to select more cores then you have on your command line!

-high:
makes your operating system prioritize services and processes to run your game better but this can cause system failure and instability if you dont have a good running system. If you Overclock this can cause system instability.
-noSplash:
disables startup videos and advertisements.
-cpuCount=#:
enables extra CPU cores and Hyperthreads.
-maxMem=#:
when set to "6144" (6GB) and up lets your game use more system Ram then 4GB.
Do not set to higher than 4GB if you dont have at least 8GB. You can set to "8192" (8GB) if you have 12GB+ Ram.

zynx33

  • |LMC| Senior Member
  • *******
  • Posts: 1038
  • Live fast die young
Re: ARMA 3 Optimization
« Reply #1 on: March 27, 2013, 03:50:26 pm »
Yeah I already did the CPU and ram thing, didn't help. Oh well I will try the other one when I fix my computer. Thanks man(:

ZenPhire

  • |LMC| Leader
  • *******
  • Posts: 7041
  • Good times...
Re: ARMA 3 Optimization
« Reply #2 on: March 28, 2013, 04:49:48 am »
All AMD CPU's are NOT Hyperthreaded so Hyperthreaded options is highly not recommended as this can cause system failure or damage.
I will not be responible for system failure and damage if you choose to select more cores then you have on your command line!
WHAA? lol
Oh and if you have newer AMD processor, you might want to set it for your num of full cores (modules). eg: for AMD FX-8350 (Marketed 8 core) that would be 4 cores, as 3D games are usually heavy on FP calcs. But who knows, they could use an entire core just for AI which could be mostly integer. Just some food for thought.
“Be kind, for everyone you meet is fighting a hard battle.” – Plato

Unkn0wn

  • (LMC) Friend
  • *****
  • Posts: 277
Re: ARMA 3 Optimization
« Reply #3 on: March 28, 2013, 10:50:39 pm »
All AMD CPU's are NOT Hyperthreaded so Hyperthreaded options is highly not recommended as this can cause system failure or damage.
I will not be responible for system failure and damage if you choose to select more cores then you have on your command line!
WHAA? lol
Oh and if you have newer AMD processor, you might want to set it for your num of full cores (modules). eg: for AMD FX-8350 (Marketed 8 core) that would be 4 cores, as 3D games are usually heavy on FP calcs. But who knows, they could use an entire core just for AI which could be mostly integer. Just some food for thought.

From what I've read Arma 3 Alpha is only using 3 cores as a default.